Possible behavior of shear deformation under high-pressure torsion

Cover Page

Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription Access

Abstract

The mutual influence of the primary and secondary order parameters when torsion is applied under high pressure is studied. Equilibrium and nonequilibrium cases are considered. The first is realized with a continuous increase in torque, and the second when studying the transition from one state to another, described by a traveling wave. The consideration was carried out on the basis of Landau's thermodynamic theory.

Full Text

Restricted Access

About the authors

Yu. D. Zavorotnev

Galkin Donetsk Institute for Physics and Engineering

Email: straumal@issp.ac.ru
Russian Federation, 283048, Donetsk

P. B. Straumal

Baikov Institute of Metallurgy and Materials Science RAS

Email: straumal@issp.ac.ru
Russian Federation, 199334, Moscow

E. Yu. Tomashevskaya

Tugan-Baranovskii Donetsk National University of Economics and Trade

Email: straumal@issp.ac.ru
Russian Federation, 283048, Donetsk

B. B. Straumal

Osip’yan Institute of Solid State Physics RAS

Author for correspondence.
Email: straumal@issp.ac.ru
Russian Federation, 142432, Chernogolovka

References

  1. Vasiliev S.V., Limanovskii A.I., Tkachenko V.M., Tsvetkov T.V., Svyrydova K.A., Burkhovetskii V.V., Sayapin V.N., Terekhov S.V., Tkatch V.I. // Mater. Today Commun. 2020. V. 24. P. 101080. https://doi.org/10.1016/j.mtcomm.2020.101080
  2. Vasiliev S.V., Limanovskii A.I., Tkachenko V.M., Tsvetkov T.V., Svyrydova K.A., Burkhovetskii V.V., Tkatch V.I. // Mater. Lett. 2022. V. 318. P. 132155. https://doi.org/10.1016/j.matlet.2022.132155
  3. Vasiliev S.V., Limanovskii A.I., Tkachenko V.M., Tsvetkov T.V., Svyrydova K.A., Burkhovetskii V.V., Sayapin V.N., Naumchuk O.A., Aronin A.S., Tkatch V.I. // Mater. Sci. Eng. A. 2022. V. 850. P. 143420. https://doi.org/10.1016/j.msea.2022.143420
  4. Фабричная О.Б., Кригель М.Й., Рафайя Д., Булатов М.Ф., Некрасов А.Н., Барецки Б. // Письма в ЖЭТФ. 2020. Т. 111. С. 674. https://doi.org/10.31857/S1234567820100055
  5. Straumal B.B., Kilmametov A.R., Ivanisenko Y., Kurmanaeva L., Baretzky B., Kucheev Y.O., Zięba P., Korneva A., Molodov D.A. // Mater. Lett. 2014. V. 118. P. 111. https://doi.org/10.1016/j.matlet.2013.12.042
  6. Straumal B.B., Kilmametov A.R., Baretzky B., Kogtenkova O.A., Straumal P.B., Litynska-Dobrzynska L., Chulist R., Korneva A., Zieba P. // Acta Mater. 2020. V. 195. P. 184. https://doi.org/10.1016/j.actamat.2020.05.055
  7. Straumal B., Kilmametov A., Korneva A., Zięba P., Zavorotnev Yu., Metlov L., Popova O., Baretzky B. // Crystals. 2021. V. 11. P. 766. https://doi.org/10.3390/cryst11070766
  8. Korneva A., Kilmametov A., Zavorotnev Y., Metlov L., Popova O., Baretzky B. // Mater. Lett. 2021. V. 302. P. 130386. https://doi.org/10.1016/j.matlet.2021.130386
  9. Заворотнев Ю.Д., Метлов Л.С., Томашевская Е.Ю. // ФТТ. 2022. Т. 64. С. 462. https://doi.org/10.21883/FTT.2022.04.52186.263
  10. Страумал Б.Б., Заворотнев Ю.Д., Метлов Л.С., Страумал П.Б., Петренко А.Г., Томашевская Е.Ю. // Физика металлов и металловедение. 2022. Т. 123. С. 1283. https://doi.org/10.31857/S0015323022600964
  11. Изюмов Ю.А., Сыромятников В.Н. Фазовые переходы и симметрия кристаллов. М: Наука, 1984. 248 с.
  12. Гуфан Ю.М. Структурные фазовые переходы. М: Наука, 1982. 304 с.
  13. Попов Л.Е., Кобытев В.С., Ковалевская Т.А. Пластическая деформация сплавов. М: Металлургия, 1984. 183 с.
  14. Спенсер Э. Теория инвариантов. М: Мир, 1974. 157 с.
  15. Chow C.K., Nembach E. // Acta Metall. 1976. V. 24. P. 453. https://doi.org/10.1016/0001-6160(76)90066-3

Supplementary files

Supplementary Files
Action
1. JATS XML
Download
2. Fig. 1. Dependence of the order parameter on the number of revolutions, annealing temperature: 570 (solid line); 950 ° C (dashed line).

Download (66KB)
Indexing metadata
3. Fig. 2. Dependence of shear deformation on the number of revolutions, annealing temperature: 570 (solid line); 950 ° C (dashed line).

Download (84KB)
Indexing metadata
4. Fig. 3. Dependence of shear deformation on the number of revolutions in the case of θ1 > 0, θ2 > 0, annealing temperature: 570 (solid line); 950 °C (dashed line).

Download (60KB)
Indexing metadata
5. Fig. 4. Dependence of shear deformation on the number of revolutions in the case of θ1 > 0, θ2 < 0, annealing temperature: 570 (solid line); 950 °C (dashed line).

Download (68KB)
Indexing metadata
6. Fig. 5. Dependence of shear deformation on the number of revolutions in the case of θ1 < 0, annealing temperature: 570 (solid line); 950 °C (dashed line).

Download (67KB)
Indexing metadata
7. Fig. 6. Dependence of shear deformation on the number of revolutions in the case of -1 > 0, annealing temperature: 570 (solid line); 950 ° C (dashed line).

Download (75KB)
Indexing metadata
8. Fig. 7. The qualitative shape of the blade at low undisturbed speed.

Download (54KB)
Indexing metadata
9. Fig. 8. Qualitative shape of the strain tensor component at a low undisturbed kink velocity, depending on the left boundary condition: solid line and dotted line – initial conditions are less stationary, dashed – more.

Download (63KB)
Indexing metadata

Copyright (c) 2024 Russian Academy of Sciences