Modeling of the process of the cement separation in the closed aerodynamic unit

Capa

Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Acesso é pago ou somente para assinantes

Resumo

The process of energy capacity reduction and increasing of the productivity of the cement manufacturing technologies is closely related to the creation of the modern closed aerodynamic units (CAU) with recirculation, which allows achieving the effective separation of the high-dispersity materials. The purpose of this study is to simulate the cement separation process in a CAU consisting of separator, thickening agent and centrifugal collector. To achieve this goal, a methodology for calculating the probability interval of the final product granules in the main participants at all stages of the CAU operation is provided. The main conditions of the operating mode are established and the approach to solve the issues of the material separation under the conditions of the flow unit mode is proposed. Special attention is paid to the mathematical methods used to estimate the fractional emission of the small granules and calculation of the recirculated material. The studies include both analytical calculations and visualization obtained by means of charts of the granulometric composition of the final product for the various components of the unit. The obtained results represent the basis for the modeling and optimization of the cement separation process in the CAU, which ensures the reliable forecasting of the analytical materials and the further possibility of using of the new technologies.

Texto integral

Acesso é fechado

Sobre autores

V. Prokopenko

Belgorod State Technological University named after V.G. Shukhov

Autor responsável pela correspondência
Email: vlad.prokopenko1@yandex.ru

Engineer, Senior Lecturer 

Rússia, 46, Kostyukova Street, Belgorod, 308012

V. Strokova

Belgorod State Technological University named after V.G. Shukhov

Email: vvstrokova@gmail.com

Doctor of Sciences (Engineering) 

Rússia, 46, Kostyukova Street, Belgorod, 308012

T. Orekhova

Belgorod State Technological University named after V.G. Shukhov

Email: nefact@mail.ru

Candidate of Sciences (Engineering) 

Rússia, 46, Kostyukova Street, Belgorod, 308012

Bibliografia

  1. Semenov A.A. Review of the Russian cement market: 2022 results. Stroitel’nye Materialy [Construction Materials]. 2023. No. 4, pp. 4–6. (In Russian). EDN: THTWDO. https://doi.org/10.31659/0585-430X-2023-812-4-4-6
  2. Kazin A.S. Industrial housing construction: yesterday, today, tomorrow. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2018. No. 10. pp. 22–26. (In Russian). EDN: YNJYLR
  3. Zhuchenko E.L., Smirnov M.E., Kapustin D.E., Guzaev V.A. Prospects for the development of gas cleaning and dust collection equipment. Tsement i Ego Primeneniye. 2024. No. 4. pp. 42–43. (In Russian). EDN: WUUKES
  4. Lokhov D.S. Heavy-medium separator DRMS. Ugol’. 2024. No. 8 (1183), pp. 63–64. (In Russian). EDN: BLJXKQ
  5. Dmitriev A.V., Bikkulov R.Ya., Madyshev I.N., Mayasova A.O., Semenychev P.A. Evaluation of the efficiency of aerosol sedimentation during gas cleaning in a multi-vortex separator. Ekologiya i Promyshlennost’ Rossii. 2022. Vol. 26. No. 3, pp. 4–9. (In Russian). EDN: JENPUW. https://doi.org/10.18412/1816-0395-2022-3-4-9
  6. Zhukov V.P., Belyakov A.N., Ogurtsov A.V. Shmelev A.S., Barakovsky D.S., Shuvalov S.I. Modeling and optimization of regular multi-stage multi-product gravity classifiers. Vestnik of Ivanovo State Power Engineering University. 2023. No. 4, pp. 77–84. (In Russian). EDN: XJWHME. https://doi.org/10.17588/2072-2672.2023.4.077-084
  7. Fadin Yu.M., Shemetova O.M., Lozovaya S.Yu., Shchendrygina I.V. Analysis of centrifugal dust collectors for use in the production of building materials. Vestnik of the Belgorod State Technological University named after V.G. Shukhov. 2024. No. 1, pp. 87–94. (In Russian). EDN: ADABOH. https://doi.org/10.34031/2071-7318-2023-9-1-87-94
  8. Colorado-Arango L., Osorio-Correa A., Bedoya-Restrepo C. et al. Grinding and classification efficiency evaluation in raw materials: cement plant study. DYNA. 2023. Vol. 90. No. 22, pp. 148–158. https://doi.org/10.15446/dyna.v90n229.110576
  9. Bashmakov I.A., Potapova E.N., Borisov K.B., Lebedev O.V., Guseva T.V. Decarbonization of the cement industry and development of environmental and energy management systems. Stroitel’nye Materialy [Construction Materials]. 2023. No. 9, pp. 4–12. (In Russian). EDN: DVGDSP. https://doi.org/10.31659/0585-430X-2023-817-9-4-12
  10. Russian Federation Patent 2625841. Sposob razdeleniya tonkodispersnykh poroshkov [Method for separating fine powders]. Prokopenko V.S., Sharapov R.R., Agarkov A.M. Patent Holder: Federal State Budgetary Educational Institution of Higher Education “V.G. Shukhov Belgorod State Technological University”. Declared 23.12.2015. Published. 19.07.2017. EDN: AXAXCY
  11. Agarkov A.M., Sharapov R.R. On the issue of air velocity and pressure in an inertial concentrator. Vestnik of the Belgorod State Technological University named after V.G. Shukhov. 2020. No. 1, pp. 101–109. (In Russian). EDN: XKCJDS. https://doi.org/10.34031/2071-7318-2020-5-1-101-109
  12. Zhukov V.P., Belyakov A.N., Ogurtsov A.V., Shmelev A.S., Barakovskikh D.S., Shuvalov S.I. Modeling and optimization of regular multi-stage multi-product gravity classifiers. Vestnik of Ivanovo State Power Engineering University. 2023. No. 4, pp. 77–84. (In Russian). EDN: XJWHME. https://doi.org/10.17588/2072-2672.2023.4.077-084
  13. Barakovskikh D.S., Shishkin S.F. Calculation of a closed grinding cycle in a jet mill with two classifiers. IOP Conference Series: Materials Science and Engineering. 2020. 966 (1). EDN: WPLXFF. https://doi.org/10.1088/1757-899X/966/1/012005

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML
Baixar
2. Fig. 1. Diagrammatic flow sheet of the closed aerodynamic unit: 1 – separator; 2 – thickening agent; 3 – Centrifugal collector; 4 – air-blower; 5 – recirculation gas duct. Structure of the product flows of the different granulometric composition: R11 – stock; R21 – product extracted in the separator with diameter d> 80 μm; R31=R12 – product extracted in separator, d<80 μm; R22 – product extracted in the thickening agent, d>40 μm; R32=R13 – product extracted in the thickening agent, d<40 μm; R33 – final product, d<40 μm; R23 – air mixture with material that has not settled in the centrifugal collector concentrator, d<40 μm; R33 – finished product, d<40 μm; R23 – air mixture with material that has not settled in the cyclone

Baixar (79KB)
Metadados
3. Fig. 2. Fractional content of the different sizes depending on the type of product and the type of the equipment during the operation of the CAU: 1 – separator tailings R21(d); 2 – crude product from the concentrator R22(d); 3 – material from the centrifugal collector to the gas duct R23(d)

Baixar (54KB)
Metadados
4. Fig. 3. Fractional emission of the thin product, taking into account the fraction of the material recirculation (a) according to the formula 9, depending on the configuration of the aerodynamic unit: a – «separator + centrifugal collector»; b – «separator+thickening agent+centrifugal collector»; 1 – at a=0; 2 – at a=0,5; 3 – at a=0,9

Baixar (77KB)
Metadados

Declaração de direitos autorais © ООО РИФ "СТРОЙМАТЕРИАЛЫ", 2025